2026 MODEL · JARVIS2

Your onn.
Your control.

2026 onn 4K Pro unlock & root

Unlock your bootloader and install permanent Magisk root with a guided walkthrough on your Linux computer. Connect over your home network and follow the prompts.

Android 14 · US 15640252 / Canada 15016191 · No USB cable required

THE SUPPORTED HARDWARE2026
2026 onn 4K Pro with an elongated fabric-covered body, its remote, and blue retail box.
The new 4K Pro.2026 hardware · jarvis2 · S905X5M / S7D
Photo: Walmart ↗
MODEL MATTERS

This installer is for the 2026 onn 4K Pro on the exact firmware below.

Have the 2024 model?

01 / CHECK BEFORE YOU START

Exact firmware.
Checked before changes.

The script checks the physical unit, firmware, bootloader and active slot before making changes. A mismatch stops the process.

The network DSU guide supports US Android 14 build 15640252 and Canada/ROW build 15016191. Canadian units get a choice of network DSU or USB rooting. Contributor kushmint reports successful Canadian slot-A DSU root; we have not independently tested the Canadian methods on hardware, and Canadian slot B has no separate report. The guide explains the US image source and pre-flash snapshot limitations before asking the owner to accept the risk. Read the Canada/ROW instructions.

View the supported profile

US CONFIGURATION

Device
2026 onn 4K Pro jarvis2
Android
14 API 34
Build
URO3.260203.035.A1
15640252
Security patch
2026-06-01
Bootloader
01.01.260525.135322
Active slot
_a or _b
Userspace
ARM32 armeabi-v7a
Root target
Active init_boot_a or init_boot_b 8 MiB

Both active slots have successful unlock and root results: community reports for slot A and measured hardware verification for slot B. The installer keeps the selected slot throughout. Keep the profile checks intact.

02 / ONE GUIDED WALKTHROUGH

Run the script.
Follow the prompts.

Full README

What you need

  • An x86-64 Linux computer, Python 3.10+ and at least 12 GiB free.
  • The supported onn firmware, at least 8 GiB free, a TV, its remote and steady power.
  • Your computer and onn on the same network.
  • Android NDK 28.2.13676358, installed through Android SDK Manager.

The guide finds the NDK or asks for its folder. It explains how to enable Developer mode, USB debugging and Wi-Fi debugging, including after the unlock reset.

Enter the onn’s IP address the first time. Give it any name you like; its hardware serial keeps the correct unit selected.

01 · HOST PACKAGES · DEBIAN / UBUNTU
sudo apt-get install git python3 adb iproute2 erofs-utils secilc
02 · GET THE FILES & START
git clone https://github.com/openensemble/onn-4k-pro-2026-unlock-root.git
cd onn-4k-pro-2026-unlock-root
python3 onn2026.py

Run these commands on your Linux computer. The script manages unlocking, root installation, verification and disabling automatic system updates.

03 / THE EVIDENCE

Permanent root, verified.
The testing limits, clearly stated.

WHAT WAS TESTED

Measured slot-B results and slot-A community reports.

  • Persistent unlock and Magisk 30.7 root after normal Android and Magisk’s setup reboot.
  • The temporary Android return, root console, one init_boot flash and independent readback.
  • The original Android returned, SELinux stayed Enforcing, and the temporary system was removed.
  • The builder and root verifier were checked. The guided flow, reconnects and reboot guards were checked with simulated device responses.
  • Community reports confirm successful unlock and root installations on active slot A.
Read the measured results

WHAT WAS NOT TESTED

These limits still apply.

  • Every recovery, interruption and reconnect path on real hardware.
  • The latest recovery and wireless discovery changes under real network conditions.
  • Recovery after power loss or an unbootable modified init_boot image.

The already-rooted unit was not unlocked or flashed again to test the packaged workflow. A stock backup does not guarantee recovery.

Validation details

Hardware results recorded November 10, 2026, on the exact firmware listed above.

04 / GOOD TO KNOW

A few practical
details.

Can this handle multiple onns or a changed IP?

Yes. Add each supported 2026 unit once using its IP address, then choose it from the saved-device list. Each keeps its own progress and backups. After an address change, the guide looks for the same hardware serial. If it cannot verify the unit, it asks for help rather than selecting a different onn.

Does the script handle the restarts?

It requests the unlock, verified root-install and temporary-system restarts automatically. After the unlock reboot, you must complete the factory reset in Android Recovery on the TV; this erases all user apps, accounts, settings and other local data. The temporary-system return test still needs one physical power cycle. Magisk handles its own setup restart after you accept its message on the TV. An uncertain reboot request is never automatically repeated.

Can I stop and continue later?

Type q at a prompt, then run python3 onn2026.py again to continue. Keep the computer’s work/ folder with its progress, backups and attempt records. An uncertain write or reboot stops for inspection instead of being replayed.

What happens to automatic updates?

The guide disables automatic Android system-update scheduling and checks the setting before reporting completion. App updates are separate, and manual system updates remain available.

Is this the installer for the 2024 onn?

No. The earlier jarvis / SNA hardware has a separate 2024 unlock and root guide. Use the installer for your exact model and firmware.

SUPPORT THE PROJECT

Found this useful?

Consider donating. I had to purchase two units at eBay prices to get this working. I bricked the first one.

If you’d like to send a tip, use the matching network for the address below.

Ethereum

0x994f4605d07049490687c1B64856995723f2d111

Only on the Ethereum network.

Solana

CUDbdRSngRAoky9EyVVoUFH1nTWCgAs23iR9YRWuDZJC

Only on the Solana network.

Bitcoin

3QjXzKrHKqV9QZ98ZU5JHkP1bZfx2q4Y6N

Only on the Bitcoin network.